Cisco 300-135 Dump Question Answers

Question: 11

The implementation group has been using the test bed to do an IPv6 'proof-of-concept1. After several changes to the network addressing and routing schemes, a trouble ticket has been
opened indicating that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2 (2026::102:1).Use the supported commands to isolate the cause of this fault and answer the following question. The fault condition is related to which technology?

A. NTP
B. IPv4 OSPF Routing
C. IPv6 OSPF Routing
D. IPv4 layer 3 security

Answer: C

Cisco 300-135 Sample Questions

Question: 10

R1 and R2 are directly connected using interface Ethernet0/0 on both sides. R1 and R2 were not becoming adjacent, so you have just configured R2 interface Ethernet0/0 as network type broadcast.
Which two statements are true?

A. Three OSPF routers are in the network segment connected to 192.168.1.0/24
B. R1 installs a route to 2.2.2.2/32 as O.
C. R2 is not an OSPF ABR.
D. R1 interface Ethernet0/0 is configured as OSPF type point to point.
E. R1 installs a route to 2.2.2.2/32 as O IA.
F. both routers R1 and R2 are neighbors and R2 IS BDR.

Answer: E,F

Cisco 300-135 Sample Question

Question: 9

The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241.
After several changes to the network addressing, routing schemes, DHCP services,NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.Use the supported commands to isolate the cause of this fault and answer the following question.
What is the solution to the fault condition?

A. Under the global configuration, delete the no ip dhcp use vrf connected command.
B. Under the IP DHCP pool configuration, delete the default -router 10.2.1.254 command and enter the default-router 10.1.4.5 command.
C. Under the IP DHCP pool configuration, delete the network 10.2.1.0 255.255.255.0 command and enter the network 10.1.4.0 255.255.255.0 command.
D. Under the IP DHCP pool configuration, issue the no ip dhcp excluded-address 10.2.1.1 10.2.1.253 command and enter the ip dhcp excluded-address 10.2.1.1 10.2.1.2 command.

Answer: D

Cisco 300-135 Question Answers

Question: 6

The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241.
After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions.

What is the solution to the fault condition?

A. Under the interface Serial0/0/0 configuration enter the ip nat inside command.
B. Under the interface Serial0/0/0 configuration enter the ip nat outside command.
C. Under the ip access-list standard nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command.
D. Under the ip access-list standard nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command.

Answer: C

Question : 7

Which output is expected in the blank line for the OSPF adjacency process?

A. DOWN
B. EXSTART
C. EXCHANGE
D. LOADING

Answer: B

Latest Cisco 300-135 Question Answer Download Latest 300-135 Pdf

Question : 8

The implementations group has been using the test bed to do a 'proof-of-concept'. After several changes to the network addressing, routing schemes, a trouble ticket has been opened
indicating that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2(2026::102:1). Use the supported commands to isolated the cause of this fault and answer the following questions. On which device is the fault condition located?

A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
H. ASW2

Answer: B

Cisco 300-135 Braindumps

Question: 1

Which of the following are shared distribution tree characteristics? (Choose all that apply.)

A. Memory requirements are higher for shared distribution tree than for source distribution tree.
B. Creates a tree from a central RP to all last-hop routers.
C. Uses a rendezvous point.
D. An optimal path is created between each source router and each last-hop router.
E. Place (S,G) entry in each router's multicast routing table.
F. Place (*,G) entry in a router's multicast routing to table.

Answer: C,F

Question: 2

Which of the following characteristics describe the BPDU Guard feature? (Choose all that apply.)

A. A BPDU Guard port should only be configured on ports with PortFast enabled.
B. BPDU Guard and PortFast should not be enabled on the same port.
C. BPDU Guard is used to ensure that superior BPDUs are not received on a switch port.
D. A BPDU Guard port receiving a BPDU will go into err-disable state.
E. A BPDU Guard port receiving a BPDU will be disabled.
F. BPDU Guard can be enabled on any switch port.

Answer: A,D,E

Question: 3

Which of the following are common issues that should be considered when establishing or
troubleshooting site-to-site VPNs? (Choose all that apply.)

A. User authentication
B. Overlapping IP address space
C. GRE or IPsec configuration
D. MTU size
E. VPN client software
F. Authentication server configured ly

Answer: B,C,D

Question: 4

Which output is expected in the blank line for the OSPF adjacency process?

A. DOWN
B. EXSTART
C. EXCHANGE
D. LOADING

Answer: B

Question: 5

Which of the following are TACACS+ characteristics? (Choose all that apply.)

A. Cisco proprietary
B. Standards-based protocol
C. Provides separate services for authentication, authorization, and accounting
D. Encrypts only the password
E. Uses UDP for a transport layer
F. Encrypts the entire packet

Answer: A,C,F

Download Real Latest Cisco 300-135 Dumps Exam Question